Okay so upon initial opening up the product I noticed immediately the weight these were really heavy and a lot larger than I expected. They are labeled as master and satellite so you know which ones are what. Pairing them with a cell phone is simple. the actual sound out of them is fantastic. The light is a white light and is very bright. In the application you have the ability to control the lights and speakers. The lights are dimmable within the app however if you are expecting to connect this to any echo device it will not connect I have tried for about two hours to get this to connect through Bluetooth and it will not connect that being said in addition to this if you have these installed in areas where there is a light switch and you turn the switch off you lose the Bluetooth connectivity and will have to reconnect it. If this was able to pair with the echo I would be keeping these as they sound really really good. JBL has been a power player in professional audio speakers for decades and their quality is fantastic. Unfortunately they do not work for what I want them for what they may work for you. In addition this does come with a socket extension for each bulb in case you need to extend the length of the base. These speakers only work with the sengled pulse app they will not work with the sengled smart home app. One other observation I did notice was when the master light was on full brightness there was a noticeable hum coming from the light very high-pitched very high frequency not noticeable if you're playing music at all with all the lights on . what is noticeable if you get very close to it if you are more than 2 feet away from the light itself you cannot hear the hum.
***UPDATE***
So after deciding on keeping this product for their sound quality. I was able to actually get this to work with the echo gen 3. This is how I actually did it if you are unable to connect to the echo even after the device has been disconnected from all other Bluetooth devices turn the power off to the light and back on 3 times then wait for the Bluetooth connection sound, go into your Alexa app and then pair to new device and it should work. Once you have done this and the connection has been paired with Alexa ask Alexa to disconnect the Bluetooth speaker and then connect it to your phone your phone is the only way that you can adjust the lighting make sure that you go into settings and have the app remember the last position.adjust your lights how you want them whether it be on or off I prefer to leave mine off disconnect the Bluetooth from your phone and then ask Alexa to reconnect Bluetooth device once this is done your speakers will now work with Alexa. Just one more caveat after reconnecting the Bluetooth speaker to a power source the hum that was actually in the unit when I first turned it on is no longer there.
***Update2***
So after purchasing the pulse link adapter I found that the master light will not work with the system so on that note I would suggest if you are planning to make this a artificial surround sound system and I say artificial because it's not true surround sound I would suggest purchasing the pulse link adapter and satellites only you will not need to purchase the pulse amp because the pulse link adapter does have a built-in line out for a powered sub sub. I have this system and it sounds truly amazing with the pulse link adapter you can control any audio device that is plugged into it via remote. right now I have my television plugged into it and it works flawlessly. I will be purchasing at least two more satellites to complete the system I did return the pulse amp as it will not tie in with the pulse link adapter I have decided to keep the master bulb as I will use this as part of my holiday audio scheme. One more small caveat with the pulse link adapter you can also leave your unit connected directly to Bluetooth on your phone and he was it to control the lights as long as you have the wired adapter plugged into the pulse link input I have used a splitter to run all of my audio lines that I wanted directly into the line in on the pulse link and am now able to control the volume with the echo and the TV as well as any other device I decide to hardwire into the pulse link system.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
There is a newer model of this item:
Frequently bought together
$28.49 ($14.25/Count)
Get it as soon as Monday, May 13
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
From the brand
Swipe left to find out more
-
Sengled smart lighting expert
Easy. Versatile . Brilliant
Lighting up the world since 1997.Sengled is a global innovator that bright new ideas to the lighting industry.Committed to providing smart light bulbs that make life more convenient.
-
-
-
From the manufacturer
Sengled Pulse Satellite Bulb
Turn it on, Turn it up.
A wireless speaker system integrated into an LED bulb. Connect with Bluetooth and stream from any mobile device.
Use the app to change light brightness, control volume separately or synchronously, and set equalizer modes . Available for iOS and Android.
Pulse Master bulb will communicate to Satellite bulbs up to 100 feet away.
Sound from Every Socket
Add up to 7 satellite Pulse bulbs in your lamps and recessed lighting and experience the surround sound experience. Expand your Pulse Bluetooth speaker system with additional light bulb speakers to create in-ceiling surround sound.
How To Add Satellite Bulbs to your Pulse System:
- Simply twist additional satellite bulbs into your existing lighting fixtures. Note: Satellite bulbs require a master bulb to operate.
- Connect your smartphone to Bluetooth.
- Open the Pulse app and follow instructions to add additional satellite bulbs to your Pulse system.
Add Voice Control with Alexa Devices
Pulse can be connected to the Amazon Alexa Devices to bring voice controlled music through your light socket via Bluetooth connection. Now you can enjoy high fidelity music without touching your phone.
Echo, Echo Dot, Echo Plus, Echo Spot, and Echo Show can all stream music to the Pulse bulb but none of them will have lighting control capabilities. To control the lights on the Pulse, you would have to use your mobile device’s Pulse App.
Whole Home Sound
Create an unexpected entertaining experience with the high-quality, wireless sound system that installs into your existing light sockets!
- Plug and Play - Simply twist your bulbs into standard light sockets & play.
- Powerful Sound - Enjoy high fidelity stereo in any room with 13-watt JBL loudspeakers.
- Expandable - Connect up to 8 Pulse bulbs (1 Master + 7 Satellite) and experience whole home sound.
|
|
|
|
|
|
|---|---|---|---|---|---|
| Sengled Solo | Solo Multicolor Speaker | Pulse Satellite | Pulse Kit (Master+Satellite) | Pulse Link Kit (Connect TV) | |
|
|
|
||||
| Customer Reviews |
3,260
|
3,260
|
3,457
|
482
|
117
|
| Price | $28.99 | $25.99 | $49.99 | — | — |
| Bulb Color | White | White | White / Pewter / Red | White / Pewter / Red | Pewter |
| Speaker Manufacturer | 1.07" JBL Speaker | 1.58" Speaker | JBL Speaker | JBL Speaker | JBL Speaker |
| Frequency Response | 260Hz - 18kHz | 100Hz - 20kHz | 100Hz - 20kHz | 100Hz - 20kHz | 100Hz - 20kHz |
| Speaker Power | Dual 3W Stereo | 3W (Rated) | 13W (max) | 13W (max) | 13W (max) |
| Connects to Other Pulse Speakers | - | - | ✓ | ✓ | ✓ |
| Equalizer Modes | - | - | ✓ | ✓ | ✓ |
| Dimmable with app | ✓ | ✓ | ✓ | ✓ | ✓ |
| Brightness | 550 Lumens @ 2700K | 500 Lumens @ 2700K | 600 lumens @ 2700K | 600 lumens @ 2700K | 600 lumens @ 2700K |
| Damp Rating | Dry | Damp | Dry | Dry | Dry |
| Bulb Size | A21 | A21 | BR30 | BR30 | BR30 |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
1:28
Click to play video
How to Setup Sengled Multicolor Smart Bulb Starter Kit
Sengled USA
Videos for this product
0:47
Click to play video
How to Setup Sengled Smart Bulbs with Alexa Devices
Sengled USA
Videos for this product
0:30
Click to play video
Sengled Smart WiFi Bulb A19 Multicolor that Works with Alexa
Sengled USA
Compare with similar items
This Item  Sengled Pulse LED Smart Bulb with JBL Bluetooth Speaker, App Controlled Up to 8 BR30 LED Light Bulbs with Starter Kit, E26 Base, Compatible with Amazon Alexa, White, 2 Pack |  |  |  |  |  | |
| Price | $28.49 | $53.99 | -13% $20.99 Typical: $23.99 | -38% $12.34 List: $19.99 | $41.99 | $12.46 |
| Delivery | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it May 13 - 15 | Get it as soon as Monday, May 13 | Get it as soon as Tuesday, May 14 | Get it as soon as Wednesday, May 15 |
| Customer Ratings | ||||||
| Easy to install | ||||||
| Brightness | ||||||
| Alexa integration | ||||||
| Easy to use | ||||||
| Remote Control | ||||||
| Sold By | One Click Industries | ✅✅✅ clicktosave | Xcess Limited | Amazon.com | Amazon.com | SNKR Enterprises |
| bulb shape size | br30 | a21 | br30 | a19 | par38 | a19 |
| bulb base | e26 | e26 medium | e26 medium | e26 | e26 medium | e26 |
| light source wattage | 13 watts | 60 watts | 10 watts | 12 watts | 38 watts | 9.5 watts |
| light type | LED | LED | LED | LED | LED | LED |
| light color | White | Soft White | Multicolor | 3000K Bright White | Full Color | 2700K Soft White |
| finish type | — | White | White | White | White | White |
Reviews with images
This is a really nice sounding Bluetooth device!
Okay so upon initial opening up the product I noticed immediately the weight these were really heavy and a lot larger than I expected. They are labeled as master and satellite so you know which ones are what. Pairing them with a cell phone is simple. the actual sound out of them is fantastic. The light is a white light and is very bright. In the application you have the ability to control the lights and speakers. The lights are dimmable within the app however if you are expecting to connect this to any echo device it will not connect I have tried for about two hours to get this to connect through Bluetooth and it will not connect that being said in addition to this if you have these installed in areas where there is a light switch and you turn the switch off you lose the Bluetooth connectivity and will have to reconnect it. If this was able to pair with the echo I would be keeping these as they sound really really good. JBL has been a power player in professional audio speakers for decades and their quality is fantastic. Unfortunately they do not work for what I want them for what they may work for you. In addition this does come with a socket extension for each bulb in case you need to extend the length of the base. These speakers only work with the sengled pulse app they will not work with the sengled smart home app. One other observation I did notice was when the master light was on full brightness there was a noticeable hum coming from the light very high-pitched very high frequency not noticeable if you're playing music at all with all the lights on . what is noticeable if you get very close to it if you are more than 2 feet away from the light itself you cannot hear the hum.***UPDATE***So after deciding on keeping this product for their sound quality. I was able to actually get this to work with the echo gen 3. This is how I actually did it if you are unable to connect to the echo even after the device has been disconnected from all other Bluetooth devices turn the power off to the light and back on 3 times then wait for the Bluetooth connection sound, go into your Alexa app and then pair to new device and it should work. Once you have done this and the connection has been paired with Alexa ask Alexa to disconnect the Bluetooth speaker and then connect it to your phone your phone is the only way that you can adjust the lighting make sure that you go into settings and have the app remember the last position.adjust your lights how you want them whether it be on or off I prefer to leave mine off disconnect the Bluetooth from your phone and then ask Alexa to reconnect Bluetooth device once this is done your speakers will now work with Alexa. Just one more caveat after reconnecting the Bluetooth speaker to a power source the hum that was actually in the unit when I first turned it on is no longer there.***Update2***So after purchasing the pulse link adapter I found that the master light will not work with the system so on that note I would suggest if you are planning to make this a artificial surround sound system and I say artificial because it's not true surround sound I would suggest purchasing the pulse link adapter and satellites only you will not need to purchase the pulse amp because the pulse link adapter does have a built-in line out for a powered sub sub. I have this system and it sounds truly amazing with the pulse link adapter you can control any audio device that is plugged into it via remote. right now I have my television plugged into it and it works flawlessly. I will be purchasing at least two more satellites to complete the system I did return the pulse amp as it will not tie in with the pulse link adapter I have decided to keep the master bulb as I will use this as part of my holiday audio scheme. One more small caveat with the pulse link adapter you can also leave your unit connected directly to Bluetooth on your phone and he was it to control the lights as long as you have the wired adapter plugged into the pulse link input I have used a splitter to run all of my audio lines that I wanted directly into the line in on the pulse link and am now able to control the volume with the echo and the TV as well as any other device I decide to hardwire into the pulse link system.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 10, 2020
***UPDATE***
So after deciding on keeping this product for their sound quality. I was able to actually get this to work with the echo gen 3. This is how I actually did it if you are unable to connect to the echo even after the device has been disconnected from all other Bluetooth devices turn the power off to the light and back on 3 times then wait for the Bluetooth connection sound, go into your Alexa app and then pair to new device and it should work. Once you have done this and the connection has been paired with Alexa ask Alexa to disconnect the Bluetooth speaker and then connect it to your phone your phone is the only way that you can adjust the lighting make sure that you go into settings and have the app remember the last position.adjust your lights how you want them whether it be on or off I prefer to leave mine off disconnect the Bluetooth from your phone and then ask Alexa to reconnect Bluetooth device once this is done your speakers will now work with Alexa. Just one more caveat after reconnecting the Bluetooth speaker to a power source the hum that was actually in the unit when I first turned it on is no longer there.
***Update2***
So after purchasing the pulse link adapter I found that the master light will not work with the system so on that note I would suggest if you are planning to make this a artificial surround sound system and I say artificial because it's not true surround sound I would suggest purchasing the pulse link adapter and satellites only you will not need to purchase the pulse amp because the pulse link adapter does have a built-in line out for a powered sub sub. I have this system and it sounds truly amazing with the pulse link adapter you can control any audio device that is plugged into it via remote. right now I have my television plugged into it and it works flawlessly. I will be purchasing at least two more satellites to complete the system I did return the pulse amp as it will not tie in with the pulse link adapter I have decided to keep the master bulb as I will use this as part of my holiday audio scheme. One more small caveat with the pulse link adapter you can also leave your unit connected directly to Bluetooth on your phone and he was it to control the lights as long as you have the wired adapter plugged into the pulse link input I have used a splitter to run all of my audio lines that I wanted directly into the line in on the pulse link and am now able to control the volume with the echo and the TV as well as any other device I decide to hardwire into the pulse link system.
Color: WhiteSize: 2 Count (Pack of 1)Pattern Name: LightVerified Purchase
This is a really nice sounding Bluetooth device!
Reviewed in the United States on January 10, 2020
Okay so upon initial opening up the product I noticed immediately the weight these were really heavy and a lot larger than I expected. They are labeled as master and satellite so you know which ones are what. Pairing them with a cell phone is simple. the actual sound out of them is fantastic. The light is a white light and is very bright. In the application you have the ability to control the lights and speakers. The lights are dimmable within the app however if you are expecting to connect this to any echo device it will not connect I have tried for about two hours to get this to connect through Bluetooth and it will not connect that being said in addition to this if you have these installed in areas where there is a light switch and you turn the switch off you lose the Bluetooth connectivity and will have to reconnect it. If this was able to pair with the echo I would be keeping these as they sound really really good. JBL has been a power player in professional audio speakers for decades and their quality is fantastic. Unfortunately they do not work for what I want them for what they may work for you. In addition this does come with a socket extension for each bulb in case you need to extend the length of the base. These speakers only work with the sengled pulse app they will not work with the sengled smart home app. One other observation I did notice was when the master light was on full brightness there was a noticeable hum coming from the light very high-pitched very high frequency not noticeable if you're playing music at all with all the lights on . what is noticeable if you get very close to it if you are more than 2 feet away from the light itself you cannot hear the hum.Reviewed in the United States on January 10, 2020
***UPDATE***
So after deciding on keeping this product for their sound quality. I was able to actually get this to work with the echo gen 3. This is how I actually did it if you are unable to connect to the echo even after the device has been disconnected from all other Bluetooth devices turn the power off to the light and back on 3 times then wait for the Bluetooth connection sound, go into your Alexa app and then pair to new device and it should work. Once you have done this and the connection has been paired with Alexa ask Alexa to disconnect the Bluetooth speaker and then connect it to your phone your phone is the only way that you can adjust the lighting make sure that you go into settings and have the app remember the last position.adjust your lights how you want them whether it be on or off I prefer to leave mine off disconnect the Bluetooth from your phone and then ask Alexa to reconnect Bluetooth device once this is done your speakers will now work with Alexa. Just one more caveat after reconnecting the Bluetooth speaker to a power source the hum that was actually in the unit when I first turned it on is no longer there.
***Update2***
So after purchasing the pulse link adapter I found that the master light will not work with the system so on that note I would suggest if you are planning to make this a artificial surround sound system and I say artificial because it's not true surround sound I would suggest purchasing the pulse link adapter and satellites only you will not need to purchase the pulse amp because the pulse link adapter does have a built-in line out for a powered sub sub. I have this system and it sounds truly amazing with the pulse link adapter you can control any audio device that is plugged into it via remote. right now I have my television plugged into it and it works flawlessly. I will be purchasing at least two more satellites to complete the system I did return the pulse amp as it will not tie in with the pulse link adapter I have decided to keep the master bulb as I will use this as part of my holiday audio scheme. One more small caveat with the pulse link adapter you can also leave your unit connected directly to Bluetooth on your phone and he was it to control the lights as long as you have the wired adapter plugged into the pulse link input I have used a splitter to run all of my audio lines that I wanted directly into the line in on the pulse link and am now able to control the volume with the echo and the TV as well as any other device I decide to hardwire into the pulse link system.
Images in this review
Reviewed in the United States on February 9, 2020
I run 7 of these in my retail store, and they’re perfect for this use. They are extremely easy to set up, and I’ve been using them daily for almost 4 years now with no problems whatsoever. They will never replace a high end speaker system, but they can actually get quite loud and sound surprisingly good considering their size. Obviously they don’t have a great bass sound but they don’t sound cheap or tinny either, especially at normal background music listening volumes, and they have no distortion at full volume. When I originally purchased them they were around $80 per bulb and I think they’re worth every bit of that and more. They are longer than a normal bulb, and they protrude out of my round ceiling fixtures a bit, so finding the right fixture might be a challenge depending on your situation. My more observant customers are delighted by them when they notice the sound is coming from the lights and they always ask for the brand name when I explain they’re actually speaker bulbs.
Images in this review
Reviewed in the United States on December 11, 2020
The light doesn't remember its last brightness setting when powered off / on. The app has an option "Light Memory", but it doesn't work. The light always returns to full brightness when the power is toggled. Speaking of the app, it's awful. The text is difficult to read, there are few options, and it doesn't automatically connect to the speakers. It makes you go to the phone's Bluetooth settings outside of the app to pair, and only then can it control the brightness... EVERY time the app is run.
The second satellite speaker connects automatically to the master. Thankfully that was painless.
This is a neat gadget and has some niche uses. It's not polished enough for most people though. It takes too much baby-sitting. The app experience is just dreadful.
Color: WhiteSize: 2 Count (Pack of 1)Pattern Name: LightVerified Purchase
Mediocre sound quality, no light settings memory, horrendous app
Reviewed in the United States on December 11, 2020
This light + speaker sounds great in theory, but it doesn't do either well. The light isn't very bright, rated at 55W equivalent. The sound quality is passable, with good mid and high range, but no depth at all. It sounds hollow or tinny. I have a battery powered bluetooth speaker that pushes more bass than the Sengled.Reviewed in the United States on December 11, 2020
The light doesn't remember its last brightness setting when powered off / on. The app has an option "Light Memory", but it doesn't work. The light always returns to full brightness when the power is toggled. Speaking of the app, it's awful. The text is difficult to read, there are few options, and it doesn't automatically connect to the speakers. It makes you go to the phone's Bluetooth settings outside of the app to pair, and only then can it control the brightness... EVERY time the app is run.
The second satellite speaker connects automatically to the master. Thankfully that was painless.
This is a neat gadget and has some niche uses. It's not polished enough for most people though. It takes too much baby-sitting. The app experience is just dreadful.
Images in this review
Reviewed in the United States on November 3, 2018
Color: WhiteSize: 2 Count (Pack of 1)Pattern Name: LightVerified Purchase
Top reviews from other countries
José Samuel Pereo Sánchez
Facil de usar y calidad de4 sonido
Reviewed in Mexico on July 4, 2023Color: Candy Apple RedSize: 1 Count (Pack of 1)Pattern Name: LightVerified Purchase
Robert
App for Android has some bugs.
Reviewed in Canada on July 31, 2021Color: WhiteSize: 2 Count (Pack of 1)Pattern Name: LightVerified Purchase
Amazon Customer
Lo vale.
Reviewed in Mexico on November 10, 2020Color: WhiteSize: 2 Count (Pack of 1)Pattern Name: LightVerified Purchase
